|
The packet decoders are the essential engines to decode packets. All available decoders are enabled by default, but you can close those you don't need to increase the program performance. If you
close a decoder in the list,
Colasoft Capsa will not decode the specific protocol elements when
encounters a packet of the same type until you enable it again, as a result you can not view the decode information of that packet. To open the Options - Decoder page, select Options... from the Tools menu and then press the Decoder tab. All decoders are listed by protocol and marked with a tick indicating they are enabled, use the check box before every decoder to disable it.
|
